Pryor, Owen M.Conlon, William M.Rimpel, Aaron M.Venetos, Milton J.2026-03-042024-07-2520242024-05-102024978844722745710.12795/9788447227457_40https://pepa.une.es/handle/123456789/70371Energy storage is becoming an increasing focus for the future energy markets. One potential hybrid system for ling duration energy storage is the Liquid Air Combined Cycle (LACC). The LACC utilizes excess renewable energy to liquefy and store air during the charge cycle. During its discharge cycle, the system uses the exhaust heat from a conventional combustion turbine and an ORC bottoming cycle to vaporize and superheat the stored air that has been pressurized, which is subsequently expanded to atmosphere through a turbine. During the development of the cycle, it has been identified that the main technologies to advance the cycle are the ORC bottoming cycle machinery and the coupled operation between the liquified air subsystem and the ORC subsystem. This paper presents modeling and simulation of the LACC that involves ORC conditions that fall outside the operating regime of more common applications. Due to the low temperatures of liquified air, the ORC system operates on the order of -70°C for the pump, and the turbine has a pressure ratio around 40. The conceptual design of a demonstration system has been developed that focuses on these challenges in order to advance the overall system.Libro digitalpp. 264-272Creative Commons Attribution 4.0 International (CC BY 4.0)Creative Commons Attribution 4.0 International (CC BY 4.0)http://creativecommons.org/licenses/by/4.0/Design and Modeling of a Demonstration-scale ORC Cycle for the Liquid Air Combined CycleopenAccess